10 Light Pollution Filters for Astrophotography in the City

Story

10 Light Pollution Filters for Astrophotography in the City


If you shoot your astrophotography images with a color camera in the city, there is a good chance that light pollution filters can make your life a little easier. No matter which astrophotography camera you use, filters can make the difference between a decent image and a great one. 

They ignore specific wavelengths of light in the visible spectrum associated with artificial light sources such as street lamps. The best way to determine whether a particular filter is a good fit for your skies is to review examples taken by others in similar conditions. 

A quality light pollution filter will allow the important colors and light emitted by your astrophotography subject to reach the camera sensor without the nasty brown glow of a washed-out sky. The filter’s design includes layers that block specific bandpass lines of the visible spectrum

If you’re looking to collect the absolute best image data with your camera, there is no substitute for dark skies. However, the light pollution filters in this post may make astrophotography from the city a little more practical and rewarding. 

light pollution comparison

The image above shows a 5-minute exposure at ISO 1600 using the same camera and filter under two different skies. The first was taken from my Bortle 8 backyard (2017), and the other was from my favorite dark sky area, about an hour from home. 

Top Choices

While the best light pollution filter for astrophotography depends on your imaging location and the types of projects you like to shoot most, I have a few suggestions for you based on my personal experiences in the backyard. The following filters will serve you well in a variety of situations and deep-sky projects.

  1. Best Overall: Optolong L-eXtreme
  2. Best on a Budget: SVBONY SV220
  3. Best for Broadband Targets: Optolong L-Quad eNhance

These filters can help you capture impressive deep-sky images from the city, especially objects with a strong signal in the h-alpha wavelength of the spectrum. Here is a recent image of the Flaming Star Nebula captured using the L-eXtreme filter from my backyard using a William Optics RedCat 51 telescope.

flaming star nebulaflaming star nebula

The Flaming Star Nebula and Tadpoles Nebula. ZWO ASI2600MC Air + Optolong-LeXtreme filter.

Why I Use Light Pollution Filters

I rely on light pollution filters to take astrophotography images from my backyard. They help ignore the bright city sky where I live and collect images of objects in the night sky with better contrast between my subject and a brown sky.

While I do travel to dark sky locations to take my image whenever possible, the reality is that most of my astrophotography is done at home in my Bortle Scale Class 6 backyard. 

Optolong L-Pro filter reviewOptolong L-Pro filter review

Look at the difference a light pollution filter made in my backyard sky (Optolong L-Pro). 

Not everyone agrees that using a light pollution filter for your camera is the best way to do astrophotography, but depending on where you live, it might be the only option.

In this post, I’ll share several examples of astrophotography filters being used on various deep-sky objects from the city. I asked the incredible community on the AstroBackyard Facebook page for some example images, and they delivered big time.

If you are wondering how bad the light pollution is in your backyard, there are ways to measure the brightness of the night sky and compare your results from different locations. The difference between a city sky and a rural dark sky is substantial.

Types of Light Pollution Filters

There are probably over 100 different light pollution filters available today. The bandpass allowances vary widely, but there are essentially two main types of light pollution filters for color cameras: broadband filters (broad-spectrum, multi-broadband) and multi-narrowband (often dual-narrowband) filters.

Broadband filters are used to capture more natural-looking images of objects in the night sky at the expense of allowing a little artificial light through. Multi-narrowband filters aggressively ignore most wavelengths of light in the visible spectrum, allowing narrow bandpasses of light in key areas to pass through. 

light pollution filter typeslight pollution filter types

Broadband filters effectively capture galaxies, reflection nebulae, dark nebulae, and natural star colors. Narrowband filters are best used on emission nebulae and supernova remnants. 

The type of camera you use for astrophotography will determine the right light pollution filter for you. For example, a stock DSLR camera will be much less effective when paired with a multi-narrowband filter. This is because a key bandpass for these filters is hydrogen-alpha (656nm). 

I Use Broadband Filters For:

  • The Milky Way
  • Galaxies
  • Star Clusters
  • Reflection Nebulae
  • True-color images
  • Comets
  • Meteor Showers
  • The Moon

I Use Multi-Narrowband Filters For:

  • Emission Nebulae
  • Supernova Remnants
  • Planetary Nebulae

It’s worth noting that I also shoot unfiltered in certain situations where a broadband filter would help. This often leads to a more challenging image-processing session, but the results are usually worth it. 

Real Examples from Amateurs

I know you can go to the company websites for mind-blowing example images with these filters – but maybe we should look at what actual amateurs are doing from the backyards.

Before we get started, I should mention that the effectiveness of a particular light pollution filter will depend on your imaging location. You can find out the Bortle Scale class of your home using a light pollution map or, my favorite, the ‘Clear Outside mobile app by First Light Optics.

My backyard is considered to be a class 6. The introduction of LED streetlights throughout my city over the last few years has brightened the sky significantly. I appreciate that they are full cut-off lights pointing directly downward, but what can I say? When you look up, you see fewer stars than ever before.

Using a Light Pollution Filter with a Camera Lens

There are light pollution filters available that thread onto the camera lens. These may be of interest to those wanting to capture ‘Nightscapes’ and Milky Way Photography using their camera and lens.

Filters like the Hoya Starscape Light Pollution Filter and the K&F Concept Clear Natruial Night Filter may help you produce a more pleasing image of the night sky with your camera lens. 

77mm threaded light pollution filter77mm threaded light pollution filter

K&F Concept 77mm Clear Natural Night Filter.

You can also invest in a clip-in style filter that sits beneath the lens inside the camera body, like the one shown below.

I recommend using the clip-in style filter over a large threaded (77mm, etc.) light pollution filter, as this is a better placement for filtration in the optical train. You are also not paying for a large piece of glass that needs to cover your camera’s objective lens. 

Optolong L-Pro FilterOptolong L-Pro Filter

Optolong L-Pro Clip-In Filter for Canon EOS R.

You need to ensure you purchase the correct-sized clip-in filter for your camera body. In the example above, the filter will precisely fit Canon EOS R camera bodies only. Optolong currently makes clip-in filters for Canon, Nikon, and Sony camera bodies. 

While these filters may help you collect a more pleasing image of the night sky, I have found that landscape astrophotography (Nightscapes and Milky Way Photography) requires dark skies (without a filter) for the best results.

One-Shot-Color Filters

The filters I’ll discuss in this post are primarily used with color cameras. So, DSLRs, mirrorless, and one-shot-color astronomy cameras. These are astrophotography filters that let you capture a “complete” color image in one shot. They are not narrowband filters that collect data in one wavelength of light at a time.

There are two types of filters, broadband and narrowband, and they are exactly how they sound. Broadband filters collect a wide array of light wavelengths and can produce more natural-looking colors (especially the stars). Conversely, narrowband filters isolate a very specific bandpass only but ignore much more light pollution and moonlight.

I have included multi-bandpass narrowband filters, which can often create impressive “near” full-color images in one shot (with some processing). You could call this category one-shot-color light pollution filters.

2-inch round filter2-inch round filter

A 2-inch round-mounted Optolong L-Pro filter.

Modified Camera or Dedicated Astronomy Camera

Most images I am about to share were captured with cameras highly sensitive to the hydrogen-alpha wavelength at 656 nm. (Many of the great emission nebulae really shine here.)

If you’re considering getting a dedicated astronomy camera or modifying your DSLR, the images I will share may push you over the edge. The light pollution filter should list in the description whether it was designed for a stock or modified camera.

The biggest thing to remember is that a stock DSLR or mirrorless camera will have the internal UV/IR cut filter intact, whereas a full-spectrum modified DSLR, like my Canon EOS Rebel T3i, has it removed.

Filters such as the Optolong L-Quad Enhance include an added IR cutoff to 1000nm. 

The Great Light Pollution Filter Round-Up

All of these filters will have a spectral graph on their website showing where they allow light to come through and where they don’t. Understanding the type of artificial light glowing above your backyard will help you make a smart decision about a filter.

You’ll need to purchase the correct format for your particular camera body, whether attached to a telescope or used with a camera lens.

clip-in astrophotography filter for DSLR camerasclip-in astrophotography filter for DSLR cameras

A clip-in DSLR filter will sit underneath most camera lenses. 

Clip-in models are great for camera lens work, while 2″ round-mounted versions are great for threading into your telescope flattener or filter drawer. 

Canon seems to have the widest variety of camera bodies available. More and more Nikon and Sony DSLRs and mirrorless bodies are being used for astrophotography, and I expect the availability of astrophotography filters to follow. 

For example, if you have old-school, yellow sodium vapor lamps lining your street, get one of the many light pollution filters blocking this glow (around 589nm).

I can’t tell you which light pollution filter is best for your needs, but hopefully, the examples shown in this post will give you a better understanding of what to expect.

1. Optolong L-eXtreme

I believe the Optolong L-eXtreme Filter is an improvement over the L-eNhance version. It’s a dual-band filter that isolates two important wavelengths of light emitted by many deep-sky objects. 

This filter version isolates h-alpha at a 7nm bandpass and OIII at 7nm without including H-Beta and the small bandpass between OIII and Hb.

The resulting images appear more dynamic and have better contrast. The following image of the Veil Nebula was captured using the Optolong L-eXtreme filter and a QHY268C one-shot color camera.

NGC 6914 astrophotography imageNGC 6914 astrophotography image

The Glowing Eyes of NGC 6914. ZWO ASI2600MC Pro + Optolong L-eXtreme Filter.

The Optolong L-eXtreme filter is my top choice when shooting emission nebulae from the backyard with my color cameras. The images it produces have a great separation between the target and the background sky and include a healthy amount of signal to play with in post-processing.

transmission graphtransmission graph

2. Optolong L-Pro

The Optolong L-Pro was designed for moderately light-polluted areas, although many are using this filter under some bright skies. This is a true broadband filter that aims to preserve the natural colors of stars in the night sky.

It includes a mild filter against known artificial light sources, including LED street lights. Broadband targets such as galaxies and reflection nebulae are some of the most difficult targets to capture from the city, and the image below is a testament to the practicality and performance of the L-Pro.

The following image of the Iris Nebula was captured using a ZWO ASI294MC Pro from my Bortle Scale Class 6/7 backyard using the Optolong L-Pro filter.

Iris NebulaIris Nebula

The Iris Nebula by Trevor Jones.

I used the Optolong L-Pro filter (see my video review) when imaging from my light-polluted backyard and was very happy with the results. Whether I used my DSLR camera or a dedicated astronomy camera, the stars were a bit red in the individual exposures.

This is very typical of a light pollution filter, as one of the primary light wavelengths it blocks is in the brown-orange range. However, it is possible to restore those red stars to their natural color (whether blue or yellow) using some simple techniques in Adobe Photoshop. 

filter comparisonfilter comparison

A single test exposure with, and without the L-Pro filter in place.

Comparing the transmission graphs of each light pollution filter against each other is a great way to help you decide which filter is right for you. The Optolong L-Pro filter has a very interesting bandpass selection, as you can see from the wavy transmission line with 5 humps shown below. 

Each of the 4 major dips is a known source of artificial light pollution that the filter has selectively blocked. 

Optolong L-Pro graphOptolong L-Pro graph

The next filter is less selective (more aggressive) in its light-blocking abilities, resulting in a less natural but higher contrast image. 

3. Astronomik CLS-CCD

This light pollution filter has been around for a long time and is a favorite among amateur astrophotographers shooting with a modified DSLR camera. The CLS-CCD version (unlike the “CLS” version), includes an additional IR layer for cameras that have had the stock UC/IR cut filter removed during modification. 

I personally found this filter to be one of the most useful options when shooting emission nebulae targets from the city. Unlike a milder filter like the L-Pro, the Astronomik CLS-CCD is more aggressive and creates a strong contrast between the nebula and a bright sky. 

Here is an excellent example of this filter used by Niek Damen on the Heart and Soul Nebulae.

Astronomik CLS-CCDAstronomik CLS-CCD

The Heart and Soule Nebulae by Niek Damen.

Niek mentioned that he uses this astrophotography filter on his DSLR, which he modified with a clear glass replacement he performed himself. There are many affordable DSLRs, both modified and stock, kicking around in the used market.

CLS CCDCLS CCD

If you own a Canon EOS Rebel series DSLR with the full-spectrum “naked sensor” mod, this filter is for you. In my experience, the aggressive light-blocking properties of the Astronomik CLS-CCD filter can result in images with an overly red cast, particularly noticeable in the stars. 

The red stars can be corrected in several ways during the image processing stage. I like to examine the red channel of the image and make sure that the stars are not larger here than they are in the other channels. 

Another method is to use the defringe sliders found within Adobe Camera Raw under the lens correction tab. 

Astronomik CLS-CCD graphAstronomik CLS-CCD graph

After observing the transmission graph for this filter, it’s easy to see why the images have much more contrast straight out of the camera than the Optolong L-Pro. This filter is aggressively blocking all areas of the visible spectrum except two intentional humps in the 500 to 650nm regions of the visible spectrum. 

4. SVBONY SV220

This filter is a fantastic choice for astrophotographers looking for quality results at an affordable price. It is a practical choice for either a modified or stock DSLR camera.

It provides just the right balance to focus on bright stars accurately, especially when paired with a Bahtinov mask. Overexposed, bloated stars are effectively suppressed, reducing the need for tedious star reduction in post-processing.

Crescent Nebula using Dual-Narrowband FilterCrescent Nebula using Dual-Narrowband Filter

The Crescent Nebula using the SVBONY SV220 by Tristan Petroskey. 

A standout feature of this filter is its ability to block nearly all moon glow, making it possible to capture emission nebulae even under a full moon.

This is ideal for anyone looking to extend imaging sessions through lunar phases without sacrificing image quality.

However, it’s important to note that this filter is designed specifically for Ha and OIII wavelengths, so it’s unsuitable for capturing reflection nebulae or galaxies.

 

SV220 filterSV220 filter

5. SVBONY CLS

You may be surprised to see this filter talked about on this list. To be honest, the only reason I’ve included the SVBONY CLS filter is that I realized that many people are using this filter (and similar generic-branded filters) around the world. 

The Svbony products are available on Amazon, and I myself have purchased affordable “no-name” filters for astrophotography in the past. Without having sufficient data to test myself, I would be very surprised if the Svbony wasn’t a clone of the original Astronomik CLS filter. 

Here is a useful test image from Russell Hippert of the Dumbbell Nebula using the Svbony CLS filter from a Bortle Class 8/9 sky. Russell mentioned that his city does not currently have any lighting ordinance and that broad-spectrum intrusion from reflections is very high. 

Svbony CLS filterSvbony CLS filter

The Dumbbell Nebula by Russell Hippert.

These filters are worth giving a shot. I purchased a complete set of 1.25″ Svbony filters to use with a Starlight Xpress SX-42 and was astonished by my results on the Fish Head Nebula. Here is an interesting comparison on Cloudy Nights of the Svbony CLS filter against the Optolong L-Pro. 

6. Optolong L-Quad Enhance

The Optolong L-Quad Enhance Filter is a great choice for astrophotographers who want to capture a natural-looking image while blocking some of the major light pollution emission lines.

I use this filter for broadband projects from the backyard, such as galaxies, reflection nebula, and dark nebulae. I find it to perform slightly better than the original broadband L-Pro filter. 

Optolong L Quad EnhanceOptolong L Quad Enhance

Example images taken using the Optolong L-Quad eNhance Filter. (High Point Scientific)

 

L Quad Enhance FilterL Quad Enhance Filter

 

7. Antlia Triband RGB Ultra II

The spectral design of this filter focuses on the important RGB bands, making it a practical choice for over 90% of deep-sky objects. Unlike ultra-narrowband filters, it’s versatile enough to capture galaxies, reflection nebulae, and star clusters, presenting well-balanced RGB colors, even from highly polluted Bortle 8 skies.

The Antlia team designed this filter with a broader blue bandpass to help bring out true-to-life hues in areas that naturally contain fainter blue tones. This feature also helps prevent unwanted green influence from overtaking the blue tones, a common issue in light-polluted environments.

Reflection Nebula filterReflection Nebula filter

The Dark Shark Nebula by Dan Kokinda. Antlia Triband RGB Ultra II filter.

By enhancing the blue transmission, this filter can help maintain a more natural color balance. Overall, it’s a fantastic option for anyone who wants to capture high-quality astrophotography from cityscapes or other light-polluted areas without sacrificing color accuracy.

Antlia RGB UltraAntlia RGB Ultra

The Antlia Triband RGB Ultra Filter

8. Astro Hutech IDAS Nebula Booster NB1

The IDAS Nebula Booster shares a profile similar to that of the popular Optolong L-eNhance filter. It collects light in two primary areas of the visible spectrum, H-alpha and OIII. 

The image shared by Tony Lanahan below looks remarkably similar to my version of the Heart Nebula taken using the L-eNhance. Having another option in this filter category is great news for amateur astrophotographers, as it seems dealers often have a hard time keeping them in stock. 

Optolong L-eNhanceOptolong L-eNhance

The Heart Nebula by Tony Lanahan.

The most impressive aspect of the image above is perhaps that it was captured from the edge of Chicago, a massive metropolis of light. I think you’ll find multi-bandpass nebula filters, in general, to be a lifesaver from city skies. 

As you’ll see in the transmission graph below, the IDAS NB1 also collects some data in the subtle SII wavelength. Combining all of the narrow bandpasses can result in dynamic images using a color camera. 

IDAS Nebula BoosterIDAS Nebula Booster

IDAS NBA (Nebula Booster) transmission graph.

9. Optolong L-eNhance

Since reviewing the Optolong L-eNhance filter in July 2019, I have taken almost a dozen impressive images with it. Fantastic new results are popping up daily with the L-eNhance, and I think it is safe to say this filter is a winner with color cameras.

The image below is a perfect example of what the Optolong L-eNhance filter was designed to do. In this area of the night sky, you can clearly see the light in Ha and OIII. 

North America NebulaNorth America Nebula

The North America Nebula and Pelican Nebula. Trevor Jones.

The picture above was taken using a ZWO ASI2600MC Pro color camera through an Askar SQA55 refractor telescope. This was captured from my Bortle Scale Class 6 suburban backyard. Combining a cooled CMOS astronomy camera and the L-eNhance is tough to beat. 

When comparing the transmission graph of the Optolong L-eNhance with the IDAS NB1, it is interesting to note that the cutoff after the Ha (656nm) bandpass line is steeper on the L-eNhance. In theory, this could result in higher contrast images that look slightly less “natural” in overall color.  

l-enhance transmission graphl-enhance transmission graph

Optolong L-eNhance transmission graph.

10. Baader Moon and Skyglow

Lastly, we have the Baader Moon and Skyglow filter. I experienced some early success with this broadband filter when I used my first dedicated astronomy camera (Altair Hypercam 183C). Look at how this mild light pollution filter recorded the colorful stars in this image of the Ring Nebula in Lyra.

This photo was taken from a Bortle Scale Class 8 backyard, and the natural colors the filter allowed to pass through are commendable. 

Baader Moon and Skyglow FilterBaader Moon and Skyglow Filter

The Ring Nebula by Trevor Jones

Here is a look at the Triangulum Galaxy in broadband RGB using the Baader Moon and Skyglow filter from a Bortle Scale class 4 site by Godfried Nijs. This photo was captured using a ZWO ASI294MC Pro color camera through an 8″ Celestron CPC 800 SCT telescope. 

broadband galaxy filterbroadband galaxy filter

If you are not sick of looking at transmission graphs for astrophotography filters yet, here is a look at where the Baader Moon and Skyglow filter selectively allows light to pass through.

Baader Moon and Skyglow filterBaader Moon and Skyglow filter

11. Optolong L-Ultimate

The L-Ultimate takes the success of the L-eXtreme one step further. It features an ultra-narrow 3nm bandwidth in Hydrogen Alpha and Oxygen III (656.3 nm and 500.7 nm, respectively) emission lines for the ultimate contrast in your nebulae images.

Compared to the L-eNhance and L-eXtreme filters—the L-Ultimate enhances even more contrast by blocking all other light, including wavelengths from mercury and sodium street lights. This, of course, comes at the expense of natural star colors (there is always a catch). 

Optolong L-Ultimate FilterOptolong L-Ultimate Filter

Cubby Proctor shared the following image of the Lion Nebula on the AstroBackyard Facebook page with the following remarks: 

“I’m loving this filter. Much better results from the L-eNhance, which I used before. I still use the L-Pro broadband filter when the moon is less than half otherwise I just shoot filterless. This is 27 hours on the Lion a few weeks back with the L-Ultimate.”

example image taken using the L-Ultimate filterexample image taken using the L-Ultimate filter

The Lion Nebula by Cubby Proctor. 27 Hours total exposure using the L-Ultimate filter. 

Overall, the Optolong L-Ultimate is an excellent investment for anyone shooting with a color camera in severely light-polluted areas. 

Optolong L-UltimateOptolong L-Ultimate

 

Final Thoughts

If you are looking for specific advice on choosing the right light pollution filter for your needs, you should first know that the answer depends on your unique imaging location.

For example, if you are living in a neighborhood with yellow sodium vapor lights dotting the streets, you will likely experience different results than I do from my glowing “blue-white LED” backyard. 

Orion NebulaOrion Nebula

The greatest test of a broadband RGB filter from the city is its ability to record natural-looking star colors, particularly the blues and yellows.

With careful image processing, these images can be adjusted to achieve a “near normal” looking color balance. Blend in some data shot using a broadband filter for star color, and you’ve got an impressive RGB image.

No matter which light pollution filter you choose, remember that your final result depends heavily on your image processing skills and how you manipulate the data. The images do not come directly out of the camera as you see them in this post. 

However, a light pollution filter that is a great fit for your skies will make processing the image much easier and more enjoyable.  


Trevor Jones is a deep-sky astrophotographer and a valued member of the RASC. His passion is inspiring others to start their astrophotography journey on his YouTube Channel so they can appreciate the night sky as much as he does. His images have been featured in astronomy books & online publications, including the NASA Astronomy Picture of the Day (APOD).

Helpful Resouces

Leave a Comment